Barco DX-700 - Manual (Page 35)

DX-700 • User’s Guide • Rev 02 35
2. Hardware Orientation
DX-700 Front Panel
3) Touch Screen
The Touch Screen is the DX-700’s primary user interface, which enables you to
access (or activate) all menus and functions in a variety of ways. Refer to the
“
Touch Screen ” section on page 36 for details.
4) Focus
The cyan-colored “focus” highlight indicates a button that can be activated by
pressing ENTER in the Navigation Section. The Navigation buttons are also
used to move the focus. Refer to the Navigation Section below for details.
5) Navigation Section
The Navigation Section includes four “arrow” buttons (left, right, up and down),
plus a central ENTER button.
Figure 2-2. Navigation Section
On screen, the arrow buttons are used to move the “focus” from button to button,
and they are also used to scroll lists up and down. To activate a function using the
navigation keys, move the focus to the desired button and press ENTER.
6) Function Section
The Function Section includes three buttons dedicated to single functions.
Figure 2-3. Function Section
~ Press TEST PAT to access the Test Pattern Menu, which enables you
to assign an internal test pattern to selected outputs. Refer to the “
Test
Patterns ” section on page 38 for additional details.
~ Press PRESETS to access the Preset Management Menu, which
allows you to recall and manage presets. In Chapter 4, refer to the
“
Using the Preset Management Menu ” section on page 103 for details.
~ The BLACK button is a toggle. Press once to take all outputs to black.
The button lights when pressed, and the DX-700 displays a black test
pattern on all enabled outputs. Press again to restore the previous
output video configuration.
ENTER
TEST
PAT
PRESETS
BLACK
Important The TEST PAT and PRESETS buttons are not accessible
from all menus (e.g., when you are in a Wizard).