Barco DX-700 - Manual (Page 111)

DX-700 • User’s Guide • Rev 02 111
4. Operation
Using the Input Management Menu
2. From the Home Menu, press {Input Management} to display the Input
Selection Menu
.
Figure 4-44. Input Selection Menu (sample)
3. Press {Z-Order} to display the Z-Order Menu. Each input module’s current
priority is shown in bright green letters, on top of the modules themselves.
Figure 4-45. Z-Order Menu (sample)
4. To change priority, press the Up or Down Arrow for a selected module as
required. All modules shift priority immediately.
5. Press {Previous} to return to the Input Selection Menu, where you can continue
with input management functions as required.