Front panel lockout, Cêçåí=m~åéä=içåâçìí, Operation – Barco DX-700 User Manual
Page 165
DX-700 • User’s Guide • Rev 02
165
4. Operation
Front Panel Lockout
cêçåí=m~åÉä=içÅâçìí
The DX-700 front panel can be locked out to prevent inadvertent use by unauthorized
personnel. Note that any menu can be active when you lock the front panel.
Use the following steps to lock and unlock the front panel.
1.
On the front panel, press and hold the following four buttons in turn:
~
Softkey 2
~
Softkey 4
~
Arrow Down
~
BLACK
Figure 4-103.
Lock / Unlock Buttons
With the proper sequence pressed, the message “Front Panel Locked” replaces
the menu selections on the touch screen.
2.
To unlock the panel, repeat step 1. The system returns to the same menu that
was active when the system was locked.
Tip
Press and hold the first, then the second, then the third, then
the fourth button.
ENTER
TEST
PAT
PRESETS
BLACK