Barco DX-700 - Manual (Page 164)

164 DX-700 • User’s Guide • Rev 02
4. Operation
DX-700 Management Menu Operations
p~обеЦ=auJTMM=j~е~ЦЙгЙен=pÉííáåÖë
After you make changes on the DX-700 Management Menu, you can save the state of all
banks, inputs and outputs in a single register. This register is recalled when you power up
the DX-700.
„
Use the following steps to save the system configuration:
1. From the Home Menu, press {DX-700 Management}.
2. On the DX-700 Management Menu, press {Save} to display the following prompt.
Figure 4-102. Save Prompt
~ Press {Yes} to save the system settings. A confirmation pop-up
appears. Press {OK} to return to the DX-700 Management Menu.
~ Press {No} to cancel the procedure.
This completes the Save procedure.
Note This function is the same as pressing {Save} on the Input
Management Menu
. If you wish to store bank-specific
information as a preset, instead, use the {Save As} function
on the Input Management Menu. Refer to the “
Saving
Input Management Settings ” section on page 123 for
details.