Barco DX-700 - Manual (Page 37)

DX-700 • User’s Guide • Rev 02 37
2. Hardware Orientation
DX-700 Front Panel
• Lists are used to display a variety of stored information, including Presets and
resolution formats.
Figure 2-8. Sample Preset List
• Sliders are used to adjust various display parameters, and each includes a
variety of individual controls:
Figure 2-9. Sample Slider
Following are descriptions of each slider section:
a) Arrows
Press the left or right Arrows to increase or decrease the selected value (or
parameter) by one digit with each press. This is a “fine” adjustment.
b) Slider Button
Press and drag the Slider button left or right to increment or decrement the
selected value. This is a “course” adjustment.
c) Slider Bar
Touch the Slider Bar at any location (to the left or right of the Slider Button) to
instantly move the button to that location. This is also a “course” adjustment.
a) Arrows c) Slider Bar
b) Slider Button d) Value Box
c b d
a