Barco DX-700 - Manual (Page 97)

DX-700 • User’s Guide • Rev 02 97
4. Operation
Using the Input Wizard
7. After you select an input from the Input Connection Menu (or the Dual SDI Data
Mode Select Menu
), the Window Settings Menu appears with the selected input
resolution displayed at the top.
Figure 4-28. Input Wizard: Window Settings Menu (sample)
The Window Settings Menu scales the selected input source to precisely fit the
selected output region.
Figure 4-29. Window Settings Adjustment
S
Example : If your output region is 500x400 and your input resolution is
1024x768, the system scales the input down to fit the 500x400 wall.
The following controls are available (all adjustments are in pixels):
~ Use the Window Left slider to adjust horizontal position. This slider
moves the image left or right.
~ Use the Window Top slider to adjust the input’s vertical position. This
slider moves the image up or down.
Note At this point in the Input Wizard, the selected delay mode is
applied.
Canvas
2048 pixels
1080
pixels
Output 1
PIP
500 x 400
Source
1024 x 768