Barco DX-700 - Manual (Page 23)

DX-700 • User’s Guide • Rev 02 23
NK==fåíêçÇìÅíáçå
About the DX-700
p~гйдЙ=kkf=lìíéìí=jçÇìäÉ=`зеСбЦмк~нбзел
For NNI output modules, each output is limited to the following parameters:
• A rectangular shape
• Up to 786,432 pixels
• Any orientation up to 2048 pixels on a side
Using one NNI output module (3 outputs), the following sample configuration is possible,
without exceeding pixel capacity:
Figure 1-4. Sample canvas using one NNI output module
Please note the following important points regarding the canvas:
• For both NNI and DVI output modules, if smaller tile arrays are used, more output
regions can be placed on the canvas — up to the maximum of 6 outputs.
• You cannot mix tile categories (DVI interface and NNI interface) within a bank.
• If your specific tile configuration exceeds the capacity of DX-700’s wizards, you
must use the Director Toolset. For more information, refer to the “Director
Toolset User’s Guide.
”
2048 pixels
1080
pixels
Module 1
Output 1
1024 x 768
Module 1
Output 2
1024 x 768