Operation – Barco DX-700 User Manual
Page 102
Advertising
102
DX-700 • User’s Guide • Rev 02
4. Operation
Using the Input Wizard
14.
When you are finished saving presets for this configuration, press {Next} to
display the Input Wizard Complete Menu.
Figure 4-36.
Input Wizard Complete Menu
At this point, you can run the Input Wizard for another output/input combination, or
exit the procedure.
~
Press {Yes} to return to the Output Selection Menu. Repeat the entire
procedure from step
~
Press {No} to return to the Home Menu.
Advertising