Barco DX-700 - Manual (Page 146)

146 DX-700 • User’s Guide • Rev 02
4. Operation
DX-700 Management Menu Operations
2. Press {System Reset} to display the System Reset Menu.
Figure 4-83. System Reset Menu
3. Press {Soft Reset}. The following warning appears:
Figure 4-84. Soft Reset Warning
~ Press {Yes} to reboot the system without deleting saved presets. Upon
completion, the Home Menu appears.
~ Press {No} to cancel the procedure. The System Reset Menu is
restored.
This completes the Soft Reset procedure.
mÉêÑçêãáåÖ=~=c~Ензку=oÉëÉí
„
Use the following steps to perform a complete factory reset:
1. From the Home Menu, press {DX-700 Management}.
2. Press {System Reset} to display the System Reset Menu.