Barco DX-700 - Manual (Page 194)

194 DX-700 • User’s Guide • Rev 02
_K==oÉãçíÉ=`зенкзд=mêçíçÅçä
DX-700 Remote Command List
~ MaxMode: Maximum OSD Mode
~ Index: OSD Index
~ MinIndex: Minimum OSD Index
~ MaxIndex: Maximum OSD Index
t^iilpaifpq\
• Description : This command will return the OSD type list (OSD’s string name list)
starting from the first one until the last one. Each tile type has different OSD list.
The index used by WallOSD command follows the OSD sequence returned by
this command.
• Set format : n/a
• Query format : WALLOSDLIST? | Bank | Out
• Parameters :
~ Bank: Bank ID 1 – 3
~ Out: Output ID 1 – 6
• Query returns : OSD List
• Format :
String name 1 | String name 2 | . . . . | String name n
S
Example:
Address | Temperature | Software Version | Firmware Version …….
lìíéìí=cáÄÉêäáåâ=`згг~еЗл
cf_booumto
• Description : Turn on/off all Fiberlink Rx connected to the output ID.
• Set format : FIBERRXPWR | Bank | Out | Index | Pwr
• Parameters :
~ Bank: Bank ID 1 – 3
~ Out: Output ID 1 – 6
~ Index: Fiberlink index (starts from 1, use 0 for all Fiberlinks Rx)
~ Pwr: Power mode [ 0 | 1 ] .. 0 = OFF, 1 = ON
S
Example: FIBERRXPWR | 1 | 3 | 0 | 0
• Query format : FIBERRXPWR? | Bank | Out | Index
• Query returns : Pwr | Min | Max
~ Min: Minimum power mode
~ Max: Maximum power mode