Barco DX-700 - Manual (Page 148)

148 DX-700 • User’s Guide • Rev 02
4. Operation
DX-700 Management Menu Operations
rëáåÖ=íÜÉ=qÉëí=m~ннЙке=jÉåì
The Test Pattern Menu enables you to apply a test pattern and a raster box to a selected
bank and output.
„
Use the following steps to display output test patterns:
1. From the Home Menu, press {DX-700 Management}.
2. Press {Test Patterns} to display the Output Selection Menu.
3. Select a bank and an output to display the Test Pattern Menu. You can view this
same menu by pressing the TEST PAT button on the front panel.
Figure 4-86. Test Pattern Menu
4. Select a test pattern, which replaces the active input when selected. Patterns
include:
5. If you select Adj Grid, the Grid Size section appears at the bottom of the menu,
enabling you to change grid size.
6. If you select Adj Color, the RGB Color section appears, enabling you to adjust
the colors using the sliders.
~ None (Off) ~ H Gray Ramp ~ V Gray Ramp
~ Color Bars ~ 16 x 16 Grid ~ 32 x 32 Grid
~ Burst ~ 75% Bars ~ 50% Gray
~ H Gray Steps ~ V Gray Steps ~ Adj Grid
~ Black ~ White ~ Adj Color