Barco DX-700 - Manual (Page 62)

62 DX-700 • User’s Guide • Rev 02
3. Installation
Safety Precautions
p~СЙну=mêÉÅ~мнбзел=
For all DX-700 installation procedures, observe the following important safety and handling
rules to avoid damage to yourself and the equipment:
• To protect users from electric shock, ensure that the power supplies for each unit
connect to earth via the ground wire provided in the AC power cord.
• The AC Socket-outlet should be installed near the equipment and be easily
accessible.
rей~ЕвбеЦ=~еЗ=fåëéÉÅíáçå=
Before opening the DX-700 box, inspect it for damage. If you find any damage, notify the
shipping carrier immediately for all claims adjustments. As you open the box, compare its
contents against the packing slip. If you find any shortages, contact your Barco sales
representative.
Once you have removed all the components from their packaging and checked that all the
listed components are present, visually inspect each unit to ensure there was no damage
during shipping. If there is damage, notify the shipping carrier immediately for all claims
adjustments.
páíÉ=mêÉé~к~нбзе=
The environment in which you install your DX-700(s) should be clean, properly lit, free from
static, and have adequate power, ventilation, and space for all components.
`~ДдЙ=~еЗ=^З~йнЙк=fåÑçêã~нбзе
The table below provides information regarding supplied cables and adapters:
Table 3-1. DX-700 cables and adapters
Cable / Adapter Description Quantity
AC Power Cord 7 foot, 10A 1 US, 1 EU
Ethernet Cable 15M 1
Crossover adapter 1
DVI Cable 5 M. One cable provided with each DVI output module 1
NNI Cable Latching cable, 7.5 M. One cable provided with each NNI output module 1