Delay specifications, Delay table 50 hz, Delay table 60 hz – Barco DX-700 User Manual
Page 178: Delay table 50 hz delay table 60 hz, Delay, Specifications, Aйд~у=pééåáñáå~нбзел, Aйд~у=q~ääé=rm=eò, Aйд~у=q~ääé=sm=eò, K==pééåáñáå~нбзел
178
DX-700 • User’s Guide • Rev 02
^K==péÉÅáÑáÅ~нбзел
Delay Specifications
aЙд~у=péÉÅáÑáÅ~нбзел
The tables in this section provide DX-700 delay specifications.
aЙд~у=q~ÄäÉ=RM=eò
The table below summarizes the DX-700’s video processing delay at 50 Hz.
*
Value applies to all sources that are also genlocked to the same
composite or black burst reference signal as the DX-700.
**
For the genlock-selected interlaced source only.
*** For the genlock-selected progressive source only.
aЙд~у=q~ÄäÉ=SM=eò
The table below summarizes the DX-700’s video processing delay at 60 Hz.
*
Value applies to all sources that are also genlocked to the same
composite or black burst reference signal as the DX-700.
**
For the genlock-selected interlaced source only.
*** For the genlock-selected progressive source only.
Table A-1.
DX-700 Video Processing Delay at 50 Hz
Processing Mode
Selected Genlock
Mode
Delay for
Interlaced
Sources
Delay for
Progressive
Sources
Minimum Delay
Input
2 ms **
2 ms ***
Reduced Delay
Input
23 ms **
2 ms ***
Standard Delay
Free-run
80 ms
60 ms
External
80 ms *
40 ms *
Input
80 ms **
40 ms ***
Table A-2.
DX-700 Video Processing Delay at 60 Hz
Processing Mode
Selected Genlock
Mode
Delay for
Interlaced
Sources
Delay for
Progressive
Sources
Minimum Delay
Input
2 ms **
2 ms ***
Reduced Delay
Input
20 ms **
2 ms ***
Standard Delay
Free-run
66 ms
50 ms
External
66 ms *
33 ms *
Input
66 ms **
33 ms ***