Dx-700 monitor outputs, Section on, Secti – Barco DX-700 User Manual
Page 54
54
DX-700 • User’s Guide • Rev 02
2. Hardware Orientation
DX-700 Rear Panel
auJTMM=jçåáíçê=lìíéìíë
The DX-700 provides two identical monitor outputs, one each in RGB and DVI formats.
Both outputs show the same video. Please note:
•
Each port’s output resolution can be selected, from 640 x 480 up to 2048 x 1080.
•
Each monitor port enables you to view any of the active primary outputs, or the
ports can be configured to display the overall output image (all wall sections) of a
selected bank.
•
A scaler within the System Module scales the selected video to fit into the
monitor's output resolution.
•
The output that you wish to monitor is selected on the Monitor Output Menu, and
the selection applies to both the RGB and DVI monitor outputs. In Chapter 4,
refer to the “
” section on page 150 for details.