Operation – Barco DX-700 User Manual
Page 95
DX-700 • User’s Guide • Rev 02
95
4. Operation
Using the Input Wizard
3.
The Input Selection Menu appears with an input card in focus. If there are
multiple input cards installed for the bank, you can select the desired input card.
The green connector indicates the “currently” selected input, or the “default” input
(if this is the first time the Input Wizard has been used).
Figure 4-25.
Input Wizard: Input Selection Menu (sample)
a.
Select the input card that contains the input that you wish to set up.
b.
Use the radio buttons to enable or disable the selected delay mode. This
function provides a final opportunity to enable/disable delay, before the
mode is actually applied.
4.
The Input Connection Menu appears for the selected input card.
Figure 4-26.
Input Wizard: Input Connection Menu (sample)