Barco DX-700 - Manual (Page 19)

DX-700 • User’s Guide • Rev 02 19
NK==fåíêçÇìÅíáçå
About the DX-700
• Output Timing — Controls for output timing have been added to the Expert
Menu. In Chapter 4, refer to the “
Using the Expert Menu ” section on page 158.
• A Minimum Delay Mode has been added. Refer to the “ DX-700 Video
Processing Delay ” section on page 28 for details.
• Restore Scaling — In the Output Display Menu, buttons have been added to
allow users to reset tile H/V scaling parameters. In Chapter 4, refer to the
“
Display Management Operations ” section on page 126 for details.
• PTRANS Command — This remote command allows users to select the Preset
transition type. In Appendix B, refer to the “
Remote Commands ” section on
page 186 for details.
cáêãï~êÉ=sÉêëáçå=OKPM=cЙ~нмкЙл
The following features have been implemented in firmware version 2.30:
• A Reduced Delay Mode has been added, which provides a significant reduction
in video processing delay. Refer to the “
DX-700 Video Processing Delay ”
section on page 28 for details.
• Tiles and Modules — support has been added for the following LED tiles and
modules:
~ T-16 tiles
~ TF-16 tiles
~ FLX series modules