Barco DX-700 - Manual (Page 99)

DX-700 • User’s Guide • Rev 02 99
4. Operation
Using the Input Wizard
~ Use the Viewport Height slider to adjust the input’s vertical size.
~ If required, press {Restore} to return the source to its default values.
9. Press {Next} to display the Wall Contrast Adjustment Menu.
Figure 4-32. Input Wizard: Wall Contrast Adjustment Menu (sample)
The Wall Contrast Adjustment Menu enables you to set the wall contrast by
adjusting the white values.
~ Use the NIT Value slider to adjust the wall’s contrast.
~ Press {Apply} to update the wall with the new settings.
10. Press {Next} to display the Wall Gamma Adjustment Menu.
Figure 4-33. Input Wizard: Wall Gamma Adjustment Menu (sample)