Setting output timing, Péííáåö=lìíéìí=qáãáåö, Operation – Barco DX-700 User Manual
Page 161
DX-700 • User’s Guide • Rev 02
161
4. Operation
DX-700 Management Menu Operations
6.
Press {Previous} to return to the Expert Menu, or press {Home} to return to the
Home Menu
.
This completes the Refresh Canvas Size procedure.
pÉííáåÖ=lìíéìí=qáãáåÖ
Using the Output Timing Menu, you can make adjustments to the timing parameters of a
selected output group. The settings apply to every output in the group.
Use the following procedure to set output timing parameters:
1.
From the Home Menu, press {DX-700 Management}.
2.
Press {Expert} to display the Expert Menu.
3.
Select {Output Timing} to display the Timing Output Select Menu.
Figure 4-99.
Timing Output Select Menu (sample)
4.
On the menu, select a bank and an output (or output group). Once selected, the
Output Timing Menu
appears.