Barco DX-700 - Manual (Page 152)

152 DX-700 • User’s Guide • Rev 02
4. Operation
DX-700 Management Menu Operations
3. Select an input module to display the Input Connection Menu.
Figure 4-90. Input Connection Menu (sample)
4. Select the connector (either DVI or RGBHV) on which you want to set up EDID,
and note that the source may need to be rebooted before any EDID changes take
effect. The EDID Menu appears. The selected input connector’s current EDID
format is shown above the format list, and the format is highlighted in the list.
Figure 4-91. EDID Menu (sample)
5. To change EDID settings, select a format from the list and press {Apply}. The
new values are stored in the input module’s non-volatile memory.