Barco DX-700 - Manual (Page 145)

DX-700 • User’s Guide • Rev 02 145
4. Operation
DX-700 Management Menu Operations
rëáåÖ=íÜÉ=cêçåí=m~åÉä=aáëéä~у=^ЗамлнгЙенл=jÉåì
The Front Panel Display Adjustments Menu enables you to adjust and calibrate the
Touch Screen display.
„
Use the following steps to adjust and calibrate the display:
1. From the Home Menu, press {DX-700 Management}.
2. Press {Front Panel} to show the Front Panel Display Adjustment Menu .
Figure 4-82. Front Panel Display Adjustments Menu
a. In the Display Brightness section, use the slider to adjust the display’s
brightness.
b. To permanently save the new brightness setting, press {Save}.
c. In the Calibrate Front Panel section, press {Calibrate} to calibrate the
touch screen. Follow the prompts on screen to complete the procedure.
d. Press {Previous} to return to the Front Panel Test Select Menu.
3. Press {Previous} to return to the DX-700 Management Menu.
This completes the Display Adjust and Calibration procedures.
oÉëÉííáåÖ=íÜÉ=póëíÉã
There are two ways to reset the DX-700:
• A “soft reset” reboots the system without deleting saved presets.
• A “factory reset” reboots the system and returns all system settings to their default
values, including all output and input setups. All saved presets are deleted.
oÉÄççíáåÖ=íÜÉ=póëíÉã
„
Use the following steps to reboot the system:
1. From the Home Menu, press {DX-700 Management}.