ADS Environmental Services Profile Software 950015B6 - Manual (Page 100)

2-60 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 – 2012 ADS LLC. All Rights Reserved.
Modem Setup parameters
A roaming SIM card in the monitor modem enables the monitor to
perform wireless communication through multiple carrier networks
in the vicinity of the monitor location. The Modem Setup device
allows you to designate the providers that support the SIM card and
offer service in the area as well as prioritize the order in which you
want the monitor to attempt to communicate through each
provider’s network. Priority should reflect the availability, strength,
reliability, and consistency of the carrier’s signal to ensure
communication. The Modem Setup list is downloaded to the
wireless monitor during activation and used every time the modem
is reset and re-establishes a connection with a provider.
Edit the modem setup device in the following way:
Parameter 1 should represent the carrier that you estimate will
ensure the highest, most consistent level of success in performing
wireless communication. Designate the remaining carriers in
descending order of reliability until you have indicated all of the
possible carrier options corresponding to your monitor location.
• Parameter 1 Enter the following information for each
carrier in this field: at+cops=1,2,””12345”” where
12345 is the wireless carrier code. (Use two sets of quote
marks before and after the wireless carrier code.) For