ADS Environmental Services Profile Software 950015B6 - Manual (Page 215)

3-34 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Average-to-Peak Table dialog
3. Enter new depth and ratio values to the table using either of the
following methods:
 Enter individual depths and corresponding ratios in the
Depth and Ratio columns to allow Profile to interpolate
the depth/ratios. The greater the number of known points,
the more accurate and complete the Average-to-Peak
table will be.
 Set the entire Ratio column to a specific ratio by entering
the value in the Ratio Value field and then selecting the
Set All Ratios button.
Note: The first depth value in the table must always equal
zero and the last value in the table must always equal the
pipe height.
4. Enter a unique name for the table into the Table Name field.
5. Select OK to save the new table.
Note: You can save multiple tables for the same location
using different names.
The Enter Starting and End Dates dialog will display.