ADS Environmental Services Profile Software 950015B6 - Manual (Page 487)

Final Data Generator 14-7
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Generating AVGUDEPTH
Construct the AVGUDEPTH data entity when you are using depth
sensor data. Select a single or combine multiple ultrasonic depth
data entities, or include pressure depth data. For example, create
the AVGUDEPTH data entity by combining the depth data from
entities U5, U7, U9, U12, and PDepth. The data for the selected
depth data entities is averaged together to create the AVGUDEPTH
entity. Specify the date and time to begin using the selected entities
as AVGUDEPTH. The Final Data Generator allows you the
flexibility to change the depth entities that represent
AVGUDEPTH as necessary. Use the AVGUDEPTH data entity
when constructing the DFinal data entity.
Performing the following steps ensures the successful generation of
the AVGUDEPTH data entity:
• Verifying the location and monitoring point for which you want
to generate AVGUDEPTH
• Selecting the AVGUDEPTH Data Type
• Choosing to calculate dependent data
• Adding entries to the AVGUDEPTH table
• Generating AVGUDEPTH
Verifying the Location and Monitoring Point
New
button
Verify the selected monitor location and monitoring point displayed
in the Location and Monitoring Point fields (located at the top of
the Final Data Generator dialog). Use the New toolbar button to
change the selection, if necessary. Refer to Changing the Selected
Database Objects in Chapter 2 for more information.