ADS Environmental Services Profile Software 950015B6 - Manual (Page 243)

Quantity Coefficient Generator 4-21
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Generating Bestfit Coefficients
When the average coefficient values (HC, Roughness, or Slope) do
not accurately reflect the true coefficients for the monitoring point,
you can generate a bestfit coefficient which minimizes the
mathematical error through the span of the coefficients.
Note: You must have at least five field confirmations at
varying depths to use this option.
Performing the following steps ensures the successful generation of
a Bestfit HC or Bestfit Roughness and Slope coefficients:
• Selecting the bestfit parameters
• Generating a Bestfit HC
• Generating a Bestfit Roughness and Slope
Selecting the Bestfit Parameters
Curve
Properties
button
Select the Curve Properties toolbar button to access the Setup tab.
Verify and update any fields on the Setup tab that may require new
information prior to generating Bestfit coefficients.