ADS Environmental Services Profile Software 950015B6 - Manual (Page 310)

Diagnostics 6-39
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
The TCP/IP Modem Status dialog displays the current status of the
wireless communication device.
3. Review the alarm IP address, signal strength, and battery voltage
to verify proper configuration and operation. A signal strength
registering between -51 and -90 dBm indicates adequate
communication; a signal strength registering between -91 and -111
dBm indicates unreliable communications.
Upload BASIC Code, Variables, Arrays, and String
Arrays
Upload the BASIC code, variables, arrays, or string arrays currently
stored in the monitor memory to your local directory or network in the
following way:
Note: ADS technicians use these features when
troubleshooting monitor issues; therefore, typical users should
rarely implement these features. In addition, these features
are not applicable to all
monitors.
1. Select the Connect button to establish communication with the
monitor.
Profile initiates communication with the monitor and establishes a
connection. Choose the Abort button prior to establishing a
connection to abort the communication attempt.
2. Select Upload Basic Code, Variables, Arrays, or String Arrays
from the Functions drop-down list.
3. Select the Perform button.
Profile displays the selected information from the monitor memory
and saves it to the database in your local directory or network.
Update Firmware
Profile enables you to download updated firmware code to your
monitors. Updated firmware may include new features and
capabilities, or performance improvements and enhancements in
functions such as data processing, analysis, or communications. The