ADS Environmental Services Profile Software 950015B6 - Manual (Page 286)

Diagnostics 6-15
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
View the associated logs through the Diagnostics tool and
Log Viewer.
 Low Modem Battery TCP/IP Enter the voltage below
which you want Profile to provide notification for the
wireless communication unit. ADS recommends leaving the
default battery setting (8.0) unchanged.
 Low Signal Strength TCP/IP Enter the signal strength (in
dBm) below which you want Profile to provide notification
for the wire communication unit. ADS recommends using the
default -95 dBm for the low signal strength.
 Low Battery FlowShark Enter the voltage below which
you want Profile to provide notification for FlowShark
monitors. ADS recommends leaving the default battery
voltage (8.0) unchanged.
 Low Battery FlowShark IS Internal Enter the voltage
below which you want Profile to provide notification for
FlowShark IS monitors. This is the voltage available to the
monitor; either from a battery internal to the monitor or the
amount of voltage supplied (and available) by an external
source. ADS recommends leaving the default battery voltage
(6.5) unchanged.
 Low Battery FlowShark IS External Enter the voltage
(this is the voltage supplied by an external power source that
may be powering both radio communications as well as the
monitor, or just the radio communications by itself) below
which you want Profile to provide notification for FlowShark
IS monitors. ADS recommends leaving the default battery
voltage (8.0) unchanged.
 Low Battery FlowAlert/RainAlert II Enter the voltage
below which you want Profile to provide notification for
FlowAlert and RainAlert II monitors. ADS recommends
leaving the default battery voltage (5.0) unchanged.