ADS Environmental Services Profile Software 950015B6 - Manual (Page 129)

Profile Main Screen 2-89
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Edit Pump Device
• In Use Select the In Use checkbox(es) corresponding to the
pump(s) you want to configure as active and for which you
want Profile to calculate quantity. Profile supports up to four
pumps.
• Channel Enter or use the arrows to indicate the appropriate
Digital Input/Output channel (between 1 and 16) to which
each pump is connected.
Note: Selecting channels 1 through 8 requires assigning
the Digital Card 1 device to the monitoring point and
selecting channels 9 through 16 requires assigning the
Digital Card 2 device to the monitoring point. Digital
Card devices do not require configuration.
• Store Data Select this checkbox to ensure Profile stores
the pump data.
Rain Gauge Device
Edit the rain gauge device in the following way. These instructions
do not apply to the rain gauge device parameters associated with
FlowShark and RainAlert II monitors. For instructions on
modifying the parameters for these monitors, refer to Rain Gauge
Device (FlowShark) on page 2-90 or Rain Gauge Device (RainAlert
II) on page 2-91.