ADS Environmental Services Profile Software 950015B6 - Manual (Page 87)

Profile Main Screen 2-47
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
 High-Depth Bias Choose this option to ensure the
monitor excludes unusual drops that may exist in the depth
readings when calculating Unidepth.
• SCADA Select the Last Data (LD) Array checkbox to
ensure IntelliServe users have access to the most current flow
data (last data array) logged by the monitor at the last firing
(time interval). By default, the LD Array is reported in MGD.
Change the units between MGD, metric, or CFS by using
Windows Explorer to browse to C:\Program Files\ADS
Corporation\Profile\SYS and copying the desired
UNITS.MGD, UNITS.MET, or UNITS.CFS file over the
UNITS.DAT file.
• Combo Sensor To Use
 Depth Select the combo sensor containing the depth
sensor you want to use for processes involving MLI and to
generate UNIDEPTH.
 Velocity Select the combo sensor containing the velocity
sensor you want to use for processes involving MLI and to
generate RAWVEL.
MLI Device (FlowShark)
Edit the MLI device properties corresponding to a FlowShark
monitor in the following way. See MLI Device on page 2-36 for a
description of the parameters corresponding to the MLI device
associated with other ADS monitors.