ADS Environmental Services Profile Software 950015B6 - Manual (Page 409)

10-18 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Clearing a Data Selection
Clear
Selection
button
Clear the current data selection span by choosing the View > Clear
Selection option or the Clear Selection toolbar button.
Performing Edits to Hydrograph Data
Edit hydrograph data using the following techniques.
Note: Prior to editing the data, be sure to verify the active
data entity from the Active Entity drop-down list. The
active entity will be the entity to which all span editing
modifications are applied. Span editing includes all
editing except single-point editing.
Adding a Value to the Data
Perform the following steps to add a value to a selected span of
hydrograph data:
1. Select the hydrograph data you want to edit. Refer to Selecting
Hydrograph Data on page 10-15 for more information on
selecting data.
2. Enter the value you want to add to the selected data in the
Adjust Value field.
Add button
3. Select the Add toolbar button.
The factor is added to the selected data, and the data now reflects
the new value. All modified data displays in purple.