ADS Environmental Services Profile Software 950015B6 - Manual (Page 268)

5-10 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Note: Logs indicating the success or failure of all monitor
communication activities are accessible through Log Viewer
and the Diagnostics tool.
Setting the Monitor Time
The Communications tool enables you to set the time for a monitor
or a group of monitors directly without going through the entire
activation process. This feature is useful for setting the monitor clock
to compensate for daylight savings time. Perform the following steps
to set the clock in a monitor or group of monitors:
Comm.
button
1. Access the Communications tool from the Profile main screen
by selecting the group or monitor location with which you want
to communicate and then selecting the Communications
toolbar button.
Set Time
button
2. Select the Set Time button from the Communications toolbar.
Go button
Schedule
button
3. Either choose the Go toolbar button to set the time for the
selected locations, or choose the Schedule toolbar button to
delay time setting for a later, more convenient time.
Warning: If the Profile database resides on a network, it is
essential that your local system is logged onto the network
for the task scheduler to initiate a scheduled activity.
Therefore, do not log off from the network when activities
are scheduled to occur.
Note: Logs indicating the success or failure of all monitor
communication activities are accessible through Log Viewer
and the Diagnostics tool.