ADS Environmental Services Profile Software 950015B6 - Manual (Page 61)

Profile Main Screen 2-21
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
4. Enter the new location Description.
5. Select the appropriate monitor Series from the drop-down list.
The series selected from this list determines the parameters and
default options displayed on the Properties dialog. The
options contained within the individual parameter fields include
only those options relevant to the selected monitor series.
6. Select the appropriate method of communication from the
Connect Using drop-down list.
Note: All communication options (Modem, Serial,
TCP/IP) may not be available for all monitor series.
7. Select another Baud Rate from the drop-down list, when
necessary. Profile automatically defaults to the preferred baud
rate for the selected monitor Series.
8. Enter the monitor location Telephone Number or the IP
Address for the connection.
Note: When entering an IP address, do not use leading
zeros before or within the IP address. For example, an IP
address of 166.213.006.020 contains leading zeros and,
therefore, should be entered in the following way:
166.213.6.20.
9. Enter the monitor Serial Number.
10. Choose one of the following methods for collecting monitor
data using Profile:
 Auto Collect Select this option to ensure Profile collects
data ranging from the last timestamp collected or a user-
defined start date and time to the current date and time
(Profile defaults to this option). The Auto Collect
checkbox must be selected to edit the Start time field and
employ this option.
 Manual Collect Select this option to ensure Profile
collects data based on the date and time range designated
in the Manual Collection section. The Auto Collect
checkbox must be deselected in order to edit the Start