ADS Environmental Services Profile Software 950015B6 - Manual (Page 127)

Profile Main Screen 2-87
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
depth alarm is selected for the float device, it cannot be
configured for the pressure device.
 Trigger Enter the pressure depth reading at or above
which you want the monitor to initiate a high depth alarm.
 Return to Normal Enter the pressure depth reading at or
below which you want the monitor to terminate alarming
conditions corresponding to a high depth alarm and report
this change in alarm status.
• Depth Alarms – High High Edit this device to ensure the
monitor initiates a high high depth alarm when a pressure
depth reading reaches or exceeds a specified depth in the
following way:
 Enable Select this checkbox to enable the high high
depth alarm options and to activate the high high depth
alarm when the appropriate conditions are satisfied. When
the High High depth alarm is selected for the float device,
it cannot be configured for the pressure device.
 Trigger Enter the pressure depth reading at or above
which you want the monitor to initiate a high high depth
alarm. ADS recommends choosing a value that is at least
2 inches greater than the value entered for the high depth
trigger when it is in use.
 Return to Normal Enter the pressure depth reading at or
below which you want the monitor to terminate alarming
conditions corresponding to a high high depth alarm and
report this change in alarm status.
• Depth Alarms – Low Edit this device to ensure the
monitor initiates a low depth alarm when a pressure depth
reading reaches or falls below a specified depth in the
following way:
 Enable Select this checkbox to enable the low depth
alarm options and to activate the low depth alarm when the
appropriate conditions are satisfied.