ADS Environmental Services Profile Software 950015B6 - Manual (Page 313)

6-42 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Update the Modem Port
The Update Modem Port function is only available for some monitor
series. If necessary, use this function to change the modem selection
between No modem, EMU, or Internal.
Update the Monitor Configuration
This function should only be utilized by a trained ADS technician.
Upload Configuration
Upload the configuration currently stored in monitor memory to your
local computer or network in the following way:
1. Select the Connect button to establish communication with the
monitor.
Profile initiates communication with the monitor and establishes a
connection. Choose the Abort button prior to establishing a
connection to abort the communication attempt.
2. Select Upload Configuration from the Functions drop-down list,
and then select the Perform button.
Profile uploads the configuration from the monitor and displays the
configuration details in printable format.
Print
button
3. (optional) Select the Print button to print the report contents.
Waveforms
Some ADS monitors can interpret and convert electronic signals
during the sensor firing to produce sensor readings. Profile can
capture the ultrasonic or velocity signals and graphically display the
sensor firing information as a waveform for analysis and
troubleshooting. Once generated, Profile stores the waveform
information for offline viewing.