ADS Environmental Services Profile Software 950015B6 - Manual (Page 245)

Quantity Coefficient Generator 4-23
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Generating a Bestfit HC
Curve
Properties
button
A Bestfit HC is based on the confirmations that best fit a curve to
produce the overall lowest error through the span of the hydraulic
coefficients. Select the Curve Properties toolbar button to access
the Manning's tab (after establishing the parameters on the Setup
tab) to generate a Bestfit HC for the current confirmation data.
Curve Properties dialog, Mannings tab
1. Select the Display checkbox in the Current section of the
screen to display the Manning's curve based on the most current
HC stored in the database (for the selected monitoring point)
for the Y axis data entity.
2. Select the Generate checkbox in the Calculated section of the
screen to generate a Manning's curve based on a calculated
hydraulic coefficient. Use the Display checkbox to draw the
curve on the scattergraph.
3. Select OK.
4. Review the Bestfit HC from the Confirmation Statistics
section.