ADS Environmental Services Profile Software 950015B6 - Manual (Page 266)

5-8 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
selected monitor series in the Voltage field. ADS
recommends leaving the default voltage unchanged.
 Temperature Warnings Enter the temperature readings
from the monitor below and above which you want Profile
to provide notification in the Low and High fields.
 TCP/IP Warnings Enter the voltage of the wireless
communication modem below which you want Profile to
provide notification in the Low Voltage field. Enter the
dBm (decibels above 1 milliwatt) below which you want
Profile to provide notification of low signal strength for the
wireless communication modem in the Low Signal Strength
field. ADS recommends leaving the default voltage and
signal strength unchanged.
 Log Communications Select the Enable checkbox to
log communication activities with the monitor. Access the
log file through the Log folder in your Profile directory.
 Validate Activation Select the Enable checkbox to
ensure the monitor returns a message confirming and
validating the BASIC code in the monitor during activation.
 Tech Mode Select the Enable checkbox to use this data
collect and monitor activate mode. This mode is quicker
than the standard mode: no sensor information or monitor
status are retrieved.
4. Select OK to close and exit the dialog.
Activating a Monitor
After completing the configuration parameters and setting up the
communication parameters, you can activate the monitor or a group
of monitors. Monitor activation involves generating the activation
data, downloading this data to the monitor, and initiating flow data
measurement and logging. The activation data includes the current
LIF (Location Information File) and other configuration parameters
necessary to ensure monitoring activities reflect the specific site