ADS Environmental Services Profile Software 950015B6 - Manual (Page 102)

2-62 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 – 2012 ADS LLC. All Rights Reserved.
Notification Device
FlowAlert and RainAlert II monitors can provide alarm notification
through IntelliServe systems, email, and cellular phone with text
messaging (SMS) capability using the Notification device. These
alarms represent High, High High, and Low Depth conditions and
Rain Events, based on the monitor type.
This device also enables monitors to report events and perform
daily check-ins to an email address and cellular phone. Events
involve low battery voltage occurrences, power failures, and float
and time errors.
Edit the Notification device for a FlowAlert or RainAlert II in the
following way:
Edit Notification Parameters
• Alarm Enable Select this checkbox to enable the options for
configuring the monitor to send an alarm to a single
IntelliServe system, cellular phone, and/or email address(es)
when necessary.
• IntelliServe Recipient Enter the IP address for the
IntelliServe system you want the monitor to notify under
alarm conditions.
• Port This field displays the number of the port on the
IntelliServe system through which wireless communication
will occur. Do not change the default value in this field; 2100
is currently the only applicable port.
The following section applies to wireless FlowAlert and RainAlert
II monitors only.