ADS Environmental Services Profile Software 950015B6 - Manual (Page 301)

6-30 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Note: This function is typically used when changing from
Serial to Wireless or Landline communication types.
Change the communication connection method in the following way:
1. Select the Connect button to establish communication with the
monitor.
Profile initiates communication with the monitor and establishes a
connection. Choose the Abort button prior to establishing a
connection to abort the communication attempt.
2. Select Communication Type or Update Connection Type from
the Functions drop-down list, and then select the Perform button.
Diagnostics > Communication Type window
3. Choose the appropriate communication method from the
Communication Type drop-down list and select OK.
 Serial Select when the monitor communications will be
performed using only a serial connection.
 Wireless/GPRS Select when the monitor communications
will be performed using TCP/IP wireless or serial
connections.
 GSM-CSD Select for monitors using GSM circuit switch
data (GSM-CSD).