ADS Environmental Services Profile Software 950015B6 - Manual (Page 517)

Balance Reporter 15-9
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Selecting the Display Type
Select a format from the Display Type drop-down list in which to
display the flow data. Select from Daily, Weekly, or Monthly to
display one-day, 7-days, or the remaining number of days in the
current month of graphical or tabular data at a time on the balance
report.
Selecting the Averaging Type
Note: This applies to graphical balance reports only.
Select a data averaging interval from the Averaging Type drop-
down list. The averaging interval determines how many data points
(from the database) are averaged together and displayed as one
point on the graphical balance report. Select from 15 minute,
Hourly, or Daily averaging intervals. For example, selecting the
Hourly averaging interval for data stored in 15-minute intervals
causes four 15-minute data points to be averaged together and
displayed as one on the graphical balance report.
Selecting the Flow Type
Select the type of flow totals to display on the report from the Flow
Type drop-down list. Select from Average Daily Flow, Minimum
Daily Flow, or Maximum Daily Flow to display the average flow,
lowest flow, or highest flow for each 24-hour period for the
downstream, composite, and net values.
Note: A graphical balance report view will display the
daily values of the selected Flow Type values along the X
axis.
Displaying Partial Days
Balance Reporter allows you to view daily minimums, maximums,
and averages for QFinal at individual monitoring points and for
composite and net quantities. However, some days may include
missing data. For periods of less than 2 contiguous hours of
missing data, Profile automatically interpolates and fills in the data