ADS Environmental Services Profile Software 950015B6 - Manual (Page 108)

2-68 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 – 2012 ADS LLC. All Rights Reserved.
 Ping Amplitude Choose the method for managing the
amplification of the analog signal that is sent out, or
transmitted from, the sensor. Smaller pipes typically
require lower (quieter) amplitude values, while larger pipes
typically need stronger (louder) amplitudes. Select the
Auto (default) option to allow the monitor to automatically
optimize the amplification of the signal. Select the
Manual option to enter a percentage of full amplification
at which to transmit the signal. Enter a percentage
between 10 and 100 (where 100 represents maximum
amplification).
Pressure tab

Edit Peak Combo Sensor 1 (or 2) Parameters