ADS Environmental Services Profile Software 950015B6 - Manual (Page 97)

Profile Main Screen 2-57
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Note: The Sampling option is available only for
FlowSharks supporting a single monitoring point.
 Store Select this checkbox to ensure Profile stores the
sampling data.
 Pulse Enter the amount of time you want the monitor to
delay between sending pulses to the sampler once sampling
activities begin.
 Mode Select the method of sampling you want to use.
Select Time Based to configure the monitor to initiate and
terminate sampling operations based on readings from a
selected Entity trigger. Select Flow Proportional to
configure the monitor to pulse the sampler based on a
specific flow quantity trigger.
 Samples Per Wakeup Select and enter or use the
arrows to indicate the total, consecutive number of times
you want the monitor to pulse the sampler within a single
interval each time the trigger condition is satisfied. Profile
defaults this field to 1.
 Time Based Edit the following parameters when using
Time Based sampling.
− Entity Select the entity you want to use as the trigger
to initiate sampling activities.
− Threshold Enter the entity value (corresponding to
the entity) at which you want to trigger sampling
activities.
− Return to Normal Enter the value at which you
want the monitor to discontinue sampling activities.
 Flow Proportional Edit the following parameters when
using Flow Proportional sampling.
− Quantity Type This option represents the kind of
flow measurement that will be used to determine the
threshold. Currently, the only option available for
triggering the sampler is Flow (QContinuity).