ADS Environmental Services Profile Software 950015B6 - Manual (Page 72)

2-32 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 – 2012 ADS LLC. All Rights Reserved.
• Max Value Enter the data value that you want to correspond
to the strongest signal available in the scale (20 mA). This
value should reflect the highest possible value for the data.
• Manual Value Enter the value that you want to represent the
output when the Enable Manual option is selected. This
parameter is applicable only for testing purposes; therefore,
ADS does not recommend editing this value.
• Enable Manual Select this checkbox to output the value
designated in the Manual Value field. ADS provides this
option only for testing purposes.
Note: Activate the monitor with the Enable Manual
option selected only to test the designated Manual Value.
Once the test is complete, you must disable this option and
reactivate the monitor to implement the Min and Max
Values entered for the output device.
• Hold On Error Select this checkbox to maintain the last
output reading when the current value is erroneous.
Data Delivery Device
The data delivery device enables FlowShark Triton and FlowHawk
monitors to upload flow data stored in the monitor memory to an
IntelliServe
® database or an FTP site at a user-designated interval.
To upload the data to an FTP site, you must know the address of the
FTP site, the folder at the FTP site in which you want the monitor to
place the data, and the username and password the monitor must use
to access the site. Edit the data delivery device in the following
way: