ADS Environmental Services Profile Software 950015B6 - Manual (Page 408)

Hydrograph Editor 10-17
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Selecting data by manually entering time
3. (Optional) Specify the default accuracy for all data selections
from the Granularity X and Y drop-down lists. For example,
selecting 1-Hour from the Granularity X drop-down list
(located in the Selection Span section of the Graph
Properties dialog) causes the time of any data selection to
default to the nearest hour. Selecting .25 from the Y drop-
down list ensures the Y axis selection span scales to the nearest
¼ increment for the corresponding unit of measure.
4. Select OK to exit the dialog.
The selected data will display inside a blue outlined area.
Selecting and Moving a Single Data Point
Select and drag any single hydrograph data point (regardless of
whether it is the active data entity) to a new value on the graph.
Position the mouse cursor over the point (a hand cursor will
display), and then click and drag the data point to a new value on
the Y (vertical) hydrograph axis.
All manually modified data displays in purple.