ADS Environmental Services Profile Software 950015B6 - Manual (Page 76)

2-36 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 – 2012 ADS LLC. All Rights Reserved.
• Flow Type Select the method through which you want the
monitor to calculate flow from the drop-down list.
• Depth Type (applies only to QContinuity) Select the
depth device from which you want to apply depth data in
calculating QContinuity from the drop-down list.
• Velocity Type (applies only to QContinuity) Select the
velocity device from which you want to apply velocity data in
calculating QContinuity from the drop-down list.
• Store Data Select this checkbox to ensure the monitor stores
the flow data. Profile does not store this data under the
default configuration.
MLI Device
Edit the MLI device in the following way: These instructions apply
to all ADS monitors with the MLI device except the FlowShark
monitor. See MLI Device (FlowShark) on page 2-47 for a
description of the parameters for the MLI device corresponding to
FlowShark monitors.
Note: The parameters available to the MLI device may
vary based on the monitor series; therefore, some
parameters may not be available on the MLI properties
dialog corresponding to certain monitors. The following
image represents an Edit MLI Device Properties dialog
for a FlowShark Triton or FlowHawk monitor.