ADS Environmental Services Profile Software 950015B6 - Manual (Page 410)

Hydrograph Editor 10-19
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Subtracting a Value from the Data
Perform the following steps to subtract a value from a selected span
of hydrograph data:
1. Select the hydrograph data you want to edit. Refer to Selecting
Hydrograph Data on page 10-15 for more information on
selecting data.
2. Enter the value you want to subtract from the selected data in
the Adjust Value field.
Subtract
button
3. Select the Subtract toolbar button.
The factor is subtracted from the selected data and now reflects the
resulting value. All modified data displays in purple.
Multiplying the Data by a Value
Perform the following steps to multiply selected hydrograph data by
a value:
1. Select the hydrograph data you want to edit. Refer to Selecting
Hydrograph Data on page 10-15 for more information on
selecting data.
2. Enter the value by which you want to multiply the selected data
in the Adjust Value field.
Multiply
button
3. Select the Multiply button.
The selected data is multiplied by the Adjust Value amount and
now reflects the resulting value. All modified data displays in
purple.