ADS Environmental Services Profile Software 950015B6 - Manual (Page 277)

6-6 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
to historical information. The following logs are available for viewing
using the Diagnostics tool:
• Activate This log contains information pertaining to a specific
monitor activation. It includes the name of the monitor location,
the date/time at which activation occurred, monitor status details,
and the device parameters for all devices configured for the
monitor. Note: If the Tech Activate function was used to perform
the monitor activation, no monitor status or current device
information will be included in the activate log.
• Analog Input This log contains the date, time, and scaled
analog reading recorded while obtaining a current analog device
reading in Diagnostics.
• Confirmation This log contains the date, time, location field
measurements, monitor measurements, and differences between
these measurements for the selected confirmation.
• Checklist This log includes the date, time, and location of the
confirmation; the specific actions performed during the
confirmation; and the conditions observed at the location.
• Collect This log contains specific information regarding a
particular data collection activity, the monitor location collected,
and the range of data collected and available for collection. It
includes the date/time range of the collected data, the monitor
status, location information, specific entities collected, number of
datapoints, data quality, Site DR results (usually found on second
page of log), and other collection-related information. Two fields
on the collect log, Data Word 1 and Diag Word 1 are specific to
ADS technicians diagnosing monitors. Note: If the Tech Collect
function was used to retrieve monitor data, no monitor status or
current device information will be included in the collect log.
• Comments This log contains any comments entered during a
specific confirmation visit.
• Configuration This log generates anytime the Upload
Configuration diagnostic function is performed and includes
monitor specific information.