ADS Environmental Services Profile Software 950015B6 - Manual (Page 415)

10-24 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
2. Select the Edit > Cut option to cut the selected data.
The data no longer displays on the hydrograph, but is placed on the
Windows clipboard.
Note: Paste cut graphical data into the Hydrograph
Editor or Tabular Editor.
Fixing Missing Data
When a span of data is missing (no data points exist), you can use
the Fix Missing tool to replace the points by creating a straight-line
interpolation of the missing data points. However, for most
locations, interpolated data is rarely valid for periods of more than a
few hours.
1. Verify the Active data entity from the Active Entity drop-
down list.
Fix
Missing
button
2. Select the missing data span using the Fix Missing toolbar
button to display the Fix Missing Data dialog, or click and
drag a selection box around the missing data time span. This
selected span should include the last existing data point before
the missing data gap and the first existing data point after the
missing data gap.
3. Select a data-averaging interval from the Interval drop-down
list for which you want to recreate points. For example,
selecting 15 minutes would create four individual data points
for each hour of missing data. Select the interval that matches
the existing data.
4. Select OK to generate and display the interpolated data.
The interpolated data will display in purple, indicating it is
modified data.