ADS Environmental Services Profile Software 950015B6 User Manual
Page 194
Installation Generator
3-13
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
6. Select Next.
7. Enter the parameters for the flume installation.
Depth Range Enter the distance from the face of the bat
to the floor of the flume at the designated measurement
point for Parshall Flumes.
Width Enter the width of the throat of the flume.
Capacity Enter the maximum capacity of the flume with
the given characteristics, as determined by you or by ADS.
8. After the flume parameters are entered, select Next.
9. Enter a descriptive name for this installation, and then select
Next.
10. Review the data for the installation, and then select Next.
11. When prompted to save the pipe table, select Yes.
The installation will be saved to the monitoring point. The
Installation Generator screen appears.