ADS Environmental Services Profile Software 950015B6 - Manual (Page 65)

Profile Main Screen 2-25
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
 Description Lines Enter or edit the descriptive
information concerning the location for display during
reporting activities.
 Elevation Enter the elevation at the location based on the
United States Geological Survey (USGS).
 Latitude Enter the latitude coordinate at the location
based on the USGS.
 Longitude Enter the longitude coordinate at the location
based on the USGS.
 Drain Basin Number Enter the designated drainage
basin number if available.
 Rain Gauge Select the rain gauge you want to assign to
the monitoring point.
4. Select OK to save these parameters to the Profile database.
The selected rain gauge is assigned to the monitoring point.
Selecting and Editing Devices
Select and edit the devices corresponding to the new monitor
location to log the desired data. Editing the devices involves setting
specific parameters to ensure the monitor and Profile properly
obtain and process the data. Perform the following steps to
properly select and edit devices:
1. Select the location for which you want to select/edit devices
from the database.
Expansion
Symbol
Properties
button
2. Expand the location contents (monitoring point and devices) by
selecting the expansion symbol corresponding to the location,
and then select Devices.
3. Select the Edit > Properties option or the Properties toolbar
button.
The Edit Devices dialog displays the available devices and devices
selected by default for Monitoring Point 1.