ADS Environmental Services Profile Software 950015B6 - Manual (Page 315)

6-44 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
3. Select the appropriate options from the Parameters section to
indicate the type of waveform you want to capture:
 Sensor Select the sensor from which you want to capture a
waveform: Ultrasonic or Velocity.
 Type Select the format of the waveform data you want to
capture.
 MinX Use the default or designate your minimum horizontal
graph scale for displaying the waveform data. This field is
typically used while reviewing a previously created
waveform.
 MaxX Use the default or designate the maximum horizontal
graph scale for displaying the waveform data. This field is
typically used while reviewing a previously created
waveform.
 MinY Use the default or designate the minimum vertical
graph scale for displaying the waveform data. This field is
typically used while reviewing a previously created
waveform.
 MaxY Use the default or designate the maximum vertical
graph scale for displaying the waveform data. This field is
typically used while reviewing a previously created
waveform.
 Details This section is populated with the waveform details
and is used by ADS personnel.
 Waveforms Choose a previously generated waveform to
review from this list when reviewing waveforms offline..
 Visible Subsets Choose a previously generated waveform
subset for the selected waveform during a waveform review.
 Print This section contains the options to print a waveform.
Choose Selected to print all waveform graphs selected from
the Waveforms list. Choose All to print all waveforms from
the Waveforms list or choose Graph to print the current
waveform.