ADS Environmental Services Profile Software 950015B6 - Manual (Page 207)

3-26 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
5. Enter the Wet Well capacity and select Next.
6. Enter the pump table description as you want it to appear in the
Select Installation drop-down list, and then select Next.
7. Review the wizard entries on the Summary dialog and select
Next.
8. Enter the pump ratings (how many gallons the pump can pump
per unit of time) for each pump on the Pump Data window.
For accuracy, these numbers should be based on actual
measurements performed at the pump station and not on the
posted pump ratings. Enter zeros for all unused pumps.
9. If necessary, enter the wet well capacity in the Wet Well
Volume field.